InCarTec 29-UC-050-VAUX Vauxhall CANBUS Steering Wheel Audio Control Interface (QUADLOCK CONNECTION)
- Availability:In Stock
- Available:4 in stock
- Item Condition:New
- Brand:InCarTec
- Product Code:29-UC-050-VAUX
- EAN / UPC:7427282736282
- Warranty:1 Year Warranty
Product Compatibility Chart
| Make | Model | Years | Notes |
|---|---|---|---|
| Vauxhall | Antara | 2007 - 2015 | |
| Vauxhall | Astra H | 2004 - 2010 | |
| Vauxhall | Corsa | 2000 - 2006 | C |
| Vauxhall | Meriva | 2003 - 2010 | A |
| Vauxhall | Signum | 2003 - 2008 | |
| Vauxhall | Tigra | 2004 - 2009 | II |
| Vauxhall | Vectra | 2005 - 2008 | C Facelift |
| Vauxhall | Zafira | 2005 - 2014 | B |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
CANBUS interface to maintain the steering wheel controls.
This interface will also adapt from the quadlock connector in the car to standard after market ISO connectors.
Provides a CANbus, powered antenna, ignition output, speed pulse, reverse gear signal and hand brake signal.
This interface will also allow you to use the car's original steering control buttons to access the original display screen to update the time and date settings.
Other Brands with a 3 wire system you will need to buy
29-UCCAB-000
To be used with non-branded and Chinese head units. Also for use with other brands of head units that have loose wires for steering control input with the feature to "learn" the steering controls.
What's Included
- 29-UC-050-VAUX Steering Control Adaptor
- Stereo Patch Lead
You have a choice from the following patch leads
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
| Radio Being Fitted | Part Number | Short Description |
| Resistive Programming (Loose Wire) | 29-UCCAB-000 | Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-UCCAB-001 | Patch lead for 29-UC Series Steering wheel control for Alpine stereo. |
| Clarion/ JVC | 29-UCCAB-003 | Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos |
| Kenwood/ JVC (Single Wire) | 29-UCCAB-005 | Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos |
| Pioneer/ Sony | 29-UCCAB-007 | Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos |
| Resistive Programming (3.5mm Jack) | 29-UCCAB-016 | 3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos |
| Universal | 29-UCCAB-SET | Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. |
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
