InCarTec 29-UC-050-VW1 - Volkswagen Steering Wheel Control Interface and Radio Adapter Cable
- Availability:In Stock
- Available:4 in stock
- Item Condition:New
- Brand:InCarTec
- Product Code:29-UC-050-VW1
- EAN / UPC:7427288177201
- Warranty:1 Year Warranty
Steering wheel control interface and adapter cable to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source, mute and phone buttons. Note; the operation of these buttons can be dependent on the vehicle specification and radio compatibility.
The CANbus interface will also provide a key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. A key present ignition means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel.
Product Compatibility Chart
| Make | Model | Variations | Years | Notes |
|---|---|---|---|---|
| Volkswagen | Amarok | 2H 1st. Gen. (2010 >) | 2009 - 2017 | |
| Volkswagen | Beetle | 2011 - 2019 | A5 | |
| Volkswagen | Caddy | 2C, 2K (2004 - 2010) | 2004 - 2009 | 3rd Gen (Pre-Facelift) |
| Volkswagen | Caddy | 2C, 2K Facelift (2010 - 2015) | 2010 - 2016 | (3rd Gen Facelift 1.0) |
| Volkswagen | Eos | 1F (2006 - 2010) 1F Facelift (2011 >) | 2006 - 2015 | |
| Volkswagen | Golf | MK5 (2004 - 2008) | 2004 - 2008 | |
| Volkswagen | Golf | MK6 (2009 - 2012) | 2009 - 2012 | |
| Volkswagen | Passat | B6 3C2 (Saloon) 3C5 (Estate) (2005 - 2010) | 2005 - 2010 | |
| Volkswagen | Passat | CC 3C Gen 1 (2008 - 2011) CC Gen 1. Facelift (2012 >) | 2008 - 2017 | |
| Volkswagen | Scirocco | III typ.13 (2008 - 2014) III typ.13 Facelift (2014 >) | 2008 - 2017 | |
| Volkswagen | Touran | MK1 GP2 (2010 - 2015) | 2010 - 2015 | |
| Volkswagen | Transporter | T5 7E/F/J/H (2003 >) | 2003 - 2009 |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
What's Included
- 29-UC-050-VW1 Steering Control Adaptor
- Stereo Patch Lead
You have a choice from the following patch leads
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
| Radio Being Fitted | Part Number | Short Description |
|
Resistive Programming (Loose Wire) |
29-UCCAB-000 | Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-UCCAB-001 | Patch lead for 29-UC Series Steering wheel control for Alpine stereo. |
| Clarion/ JVC | 29-UCCAB-003 | Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos. |
| Kenwood/ JVC (Single Wire) | 29-UCCAB-005 | Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos. |
| Pioneer/ Sony | 29-UCCAB-007 | Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos. |
|
Resistive Programming (3.5mm Jack) |
29-UCCAB-016 | 3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-UCCAB-SET |
Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. |
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
