InCarTec FK-311 Saab 9-3 2006-2013 Double Din Car Stereo Upgrade Fitting Kit (DELPHI/ FUJITSU)
- Availability:In Stock
- Available:2 in stock
- Item Condition:New
- Brand:InCarTec
- Product Code:FK-311
- EAN / UPC:7426871616288
- Warranty:1 Year Warranty
Complete stereo upgrade kit to install a Double DIN aftermarket car stereo and retain the use of the steering wheel controls in a SAAB 9-3 (2006-2013) vehicle, originally fitted with either the Delphi Grundig head unit or the Fujitsu Ten head unit.
Package Includes
- Double Din Fascia Adaptor
- Double Din Metal Cage Kit
- Steering Wheel Control Interface
- Amplifier Retention Interface
- FM Antenna Adaptor
- UNICAN Patch Lead (Included)
Product Compatibility Chart
| Make | Model | Years | Notes |
|---|---|---|---|
| Saab | 9-3 | 2006 - 2013 | mk2 facelift |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
This kit is for Saab 9-3 mk2 facelift models, fitted with either the Delphi Grundig head unit or the Fujitsu Ten head unit.
This interface comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units.
Fascia Adaptor
Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.
Use the supplied pocket with the fascia adapter to fit a single din radio, or remove the pocket and use the fascia trim only with a 103mm fitting cage to fit a double din after-market head unit. Most aftermarket radios are supplied with a 113mm high cage, because of this the 103mm fitting cage with this kit is required.
Double Din Metal Cage Kit
This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes. This cage kit comes complete with fixings to attach to the new car radio body.
Steering Control Adaptor
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
Saab Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Use with Saab cars with GM LAN bus connectors behind the radio. Does not include Telephone answer and reject features. This model is universal and can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units. It is supplied complete with instructions on how to code the head-unit to the interface.
Antenna Adaptor
Antenna cable adapter for Delphi Grundig navigation radios. This cable converts the cars existing special aerial plug to an after market DIN type used by most car radio manufacturers.
Amplifier Retention Interface
This interface converts the high level audio output of a new head unit to a low level pre amplified signal which will work with an amplifier. 4 adjustable channels for optimum audio quality, it has a built in ground loop isolator and filters to get the best sound from the amplifier.
UNICAN Patch Lead
Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.
