InCarTec FK-669-CWING Nissan Elgrand Double Din Car Stereo Upgrade Fitting Kit (Series 3 with CARWINGS)
- Availability:In Stock
- Available:5 in stock
- Item Condition:New
- Brand:InCarTec
- Product Code:FK-669-CWING
- EAN / UPC:7427282724067
- Warranty:1 Year Warranty
Product Compatibility Chart
| Make | Model | Years | Notes |
|---|---|---|---|
| Nissan | Elgrand | 2002 - 2010 | E51 |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Original Stereo Should Be Look Like This
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Nissan Elgrand E51 vehicles (WITH CARWINGS)
This fitting kit is suitable for Nissan Elgrand E51 (Series 3) models with CARWINGS. Models with CARWINGS have a control panel with directional buttons above the CD slot on the radio panel.
Package Includes
- Double DIN Fascia adapter (Matt Black)
- Steering Control Interface With Screen Retention
- Side Cameras Momentary Switch
- Antenna Adaptor
- Universal patch lead (Included)
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Steering Control Adaptor
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
Steering wheel control interface and adapter cable for Nissan Elgrand cars with CARWINGS and a 20 pin connector at the back of the radio.
The interface allows includes power and speaker connections for the new radio and a breakout cable to retain the original head unit (hidden within the dashboard) to retain use of the top screen.
The interface and radio adapter cable is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
CARWINGS Side Camera Switch
Connects to the wiring for the original Carwings wiring and allows the user to swap between the original reverse and side cameras on the top screen.
Requires hardwiring and a 97mm diameter mounting hole in a suitable place.
Universal Patch Lead
Universal patch lead to be used with In Car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.
This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.
These have a CARWINGS control panel above the CD slot on the radio panel (See below)
 |
Instructions for this product can be found here |
