InCarTec FK-853-4 Land Rover Freelander Car Stereo Fitting Kit (Basic Audio with Parking Sensors)
- Availability:In Stock
- Available:2 in stock
- Item Condition:New
- Brand:InCarTec
- Product Code:FK-853-4
- EAN / UPC:7427282653343
- Warranty:1 Year Warranty
Product Compatibility Chart
| Make | Model | Years | Notes |
|---|---|---|---|
| Land Rover | Freelander | 2006 - 2014 | II (L359) |
Complete fitting kit to allow you to change the original factory fitted car radio in a Land Rover Freelander 2 with basic audio system for a Double DIN after market unit and retain use of the original parking sensor tones.
Package Includes
- Double Din Fascia With Fitting cage
- Steering wheel control interface
- Parking Sensor Retention Interface
- Antenna Adaptor
- Universal patch lead (Included)
IMPORTANT NOTE:
PRIOR TO MAKING YOUR PURCHASE PLEASE EMAIL US TO CONFIRM THE MAKE, MODEL AND YEAR OF YOUR VEHICLE ALONG WITH A PICTURE OF THE ORIGINAL STEREO.
ALSO PLEASE ADVISE IF YOUR VEHICLE HAS THE APLINE / HARMON KARDON / HARDON KARDOM LOGIC 7 BADGES ON THE SPEAKER GRILLES.
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Steering Control Adaptor And Parking Sensor Retention Interface
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
Special interface for Freelander 2 with standard audio system. Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. CAN interface included with 12v ignition, and parking buzzer retention. Includes parking buzzers to maintain PDC/ original parking sensor tones.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.
Universal Patch Lead
Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.
