InCarTec FK-860-PDC Volvo XC90 Complete Fitting Kit With Rear PDC Retention Interface
- Availability:In Stock
- Available:5 in stock
- Item Condition:New
- Brand:InCarTec
- Product Code:FK-860-PDC
- EAN / UPC:7426871616028
- Warranty:1 Year Warranty
Product Compatibility Chart
| Make | Model | Years | Notes |
|---|---|---|---|
| Volvo | XC90 | 2002 - 2014 | 1st gen |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Volvo XC90 (2005-2014) models (With Parking sensors)
Package Includes
- Fascia Cage Kit
- Steering Wheel Audio Control Interface
- Rear Parking Tone Interface
- CAN Bus Connector
- Amplifier Bypass Cable
- Antenna Connector and Extension
- Universal patch lead (Included)
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
Includes cage kit so the aftermarket cage supplied with the new radio will not be needed.
Steering Control Adaptor
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
This interface uses loose wire connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo. Includes PHONE functions on compatible radio's. This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.
Antenna Connector and Extension
This cable converts the car radios existing aerial plug in the rear roof to DIN type used by most car radio manufacturers.
On some Volvo XC90 models, there is no antenna connector behind the radio, it is in the roof at the rear of the car. If this is the case you will need to remove the rear roof lining and locate the cars antenna system and run a antenna adapter extension cable 21-148 along the left side of the roof trim. If your Volvo XC90 already has an antenna connection behind the car radio then this part is not needed.
Amplifier Bypass Cable
Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier. The original amplifier in the car has fibre optic connections from the head unit. When replacing the head unit it will be necessary to bypass the fibre optics and ignore the original amplifier. This lead is designed to be used along with a steering wheel control interface and a parking sensor retention interface.
When bypassing the amplifier, the original subwoofer will no longer work. Additional wires are on this lead to enable the installation of an aftermarket amplifier to drive the subwoofer.
