InCarTec FK-889-PDC BMW 1 Series (2004-2010) Double Din PDC Fitting Kit Auto Air Con
- Availability:In Stock
- Available:4 in stock
- Item Condition:New
- Brand:InCarTec
- Product Code:FK-889-PDC
- EAN / UPC:7427282687249
- Warranty:1 Year Warranty
Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls and parking sensors in a BMW 1-Series (facelift model) with original automatic climate controls.
Package Includes
- Double Din Fascia (Matt Black)
- Steering Wheel Control Interface
- Parking Sensor Retention Interface
- Antenna Adaptor
- Universal patch lead (Included)
Product Compatibility Chart
| Make | Model | Years | Notes |
|---|---|---|---|
| BMW | 1 Series | 2004 - 2010 | (E81/E82/E87/E88) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Original Stereo Should Be Look Like This
Below is an image with examples of the pre and post facelift dashboards.
Fascia Adaptor
This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.
Replacement car audio fascia to enable you to change the original radio in the car to a Double din aftermarket version. The kit includes a switch relocating panel for cars with switch panel underneath the climate controls. There is a blank plate for cars that do not have the switch panel.
Steering Control Adaptor
A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.
Steering wheel control interface and adapter cable for various BMW and Mini cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard ISO aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons. The CANbus interface will also provide CANbus key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. A key present ignition means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel.
Some BMW cars go into Eco mode and the +12V supply to the radio drops causing the memory of the new radio to be lost, these cars will need a power supply directly from the battery to be supplied.
A universal patch lead is supplied in the kit, this is to pair the steering control interface to the steering control input of Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.
Aerial Adaptor
An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.
Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.
Parking Sensor Retention Interface
CANbus interface to retain the original parking distance control (PDC) tones and other vehicle warning chimes that are lost when replacing the radio in various BMW, Citroen, Peugeot, Volvo and Ford cars. The original parking tones and warning chimes in many cars are produced by the original radio and when an aftermarket radio is fitted these tones are lost. This CANbus interface reads the data in the car and reproduces the parking tones and warning chimes through an additional speaker. The interface has a universal adapter cable, this needs to be hardwired to the power, ground and CANbus wires in the car. Fitting instructions are included.
