InCarTec FK-972-USB Nissan Juke Acenta 2014-2019 Double Din Fitting Kit (Steering Control/ USB Retention)
- Availability:In Stock
- Available:5 in stock
- Item Condition:New
- Brand:InCarTec
- Product Code:FK-972-USB
- EAN / UPC:7427288102043
- Warranty:1 Year Warranty
This complete Double DIN fitting kit is designed to allow the installation of an aftermarket Double DIN car stereo into selected Nissan Juke Acenta 2014-2019 models. The included fascia panel is specifically listed for Nissan Juke 2014-2019 and is finished in gloss black, with side fixing brackets and a fascia opening size of 172mm x 98mm for a flush, vehicle-specific fit.
The included steering wheel control interface converts the original Nissan connectors to standard aftermarket ISO connections and allows the original steering wheel audio buttons to continue working with the new head unit. The product page states it retains steering wheel controls and OEM phone buttons, if equipped, while the included universal patch lead is suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese or unbranded steering wheel remote-ready head units.
This kit also includes a USB retention adapter that is listed for Nissan Juke 2014-2019 excluding Visia models, which aligns with your Acenta fitment. That adapter is designed to maintain the factory USB and AUX connections, though the page notes that USB-supported Apple CarPlay or Android Auto may be limited or unavailable through the retained port. The antenna adapter converts the Nissan grey rectangular antenna connector to a standard aftermarket male DIN connector, and its blue wire must be connected to the new radio’s antenna turn-on or remote output so the original antenna amplifier is powered correctly.
Package Includes
- Double Din Fascia Adaptor (Gloss Black)
- Steering Wheel Control ISO cable and Interface
- Rectangle to Din Aerial Antenna Adapter Cable
- OEM to USB-A Retention Adapter Cable
- Universal patch lead
Product Compatibility Chart
| Make | Model | Variations | Years | Notes |
|---|---|---|---|---|
| Nissan | Juke | F15 Facelift (2014 >) | 2014 - 2019 |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Fascia Adaptor
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia includes side fixing brackets so no fitting cage is required
Fits Nissan Juke (2014 - 2019) car models, these facelift models have wider original radios compared to the pre facelift cars.
COLOUR: GLOSS BLACK
Steering Control Interface
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. This interface allows you to retain the steering wheel controls and OEM phone buttons (if equipped) when replacing the OEM radio with a new aftermarket head unit.
OEM to USB-A Retention Adapter Cable
This USB retention cable allows the installation of an aftermarket head unit while maintaining the factory USB and AUX connections. it supports charging and basic media playback. USB-supported Android Auto or Apple CarPlay may be limited or unavailable. Easy installation preserves factory wiring, providing a seamless and professional upgrade for your vehicle’s infotainment system.
Rectangle to Din Car Aerial Antenna Adaptor Cable
Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.
This is a passive antenna adapter, however there is a loose wire that needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car.
Universal patch lead
Universal patch lead for 29-CT series steering controls. Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Follow instruction to cut loops if needed
